Tunnel kiln a matsayin daya daga cikin mafi ci-gaba fasaha a cikin bulo yin filin, don haka, idan kana so ka gina bulo factory, shi ne shakka mai kyau zabi.
Amma, yaya za a yi amfani da kiln rami don ƙone bulo?
Za mu ba ku bayani dalla-dalla.
Tushen rami ya haɗa da tukunyar bushewa da murhun wuta.
Na farko, Bayan na'urar saita bulo ta atomatik saita bulo, motar klin ta aika bulo zuwa tukunyar bushewa, don bushewa bulo.Zafin kiln bushewa yana kusan 100 ℃.Kuma akwai busasshiyar busasshiyar tukunyar, ana amfani da ita wajen fitar da danshi daga wurin busarwar.
Na biyu, bulo bayan bushewa, yi amfani da wannan hanyar, yi amfani da motar klin aika bulo zuwa murhun wuta.
Wurin harbi ya haɗa da mataki 4.
Mataki na farko : preheat mataki.
Mataki na biyu : matakin harbe-harbe.
Mataki na uku : mataki na adana zafi.
Mataki na hudu : matakin sanyaya.
Yanzu, idan kuna son gina ginin rami, za mu iya ba da ƙwararrun ma'auni na asali na kiln.
Mahimman sigogi na tunnel kiln:
| Fadi a cikin kiln (m) | Tsayin kiln (m) | Ƙarfin yau da kullun (pcs) |
| 3.00-4.00 | 1.2-2.0 | ≥70,000 |
| 4.01-5.00 | 1.2-2.0 | ≥100,000 |
| 5.01-7.00 | 1.2-2.0 | ≥150,000 |
| 7.00 | 1.2-2.0 | ≥200,000 |
Lokacin aikawa: Agusta-23-2021